55FT (16.76M) VALHALLA BOATWORKS
Yacht for Sale

• Valhalla Grey gelcoat hull sides
• Black bottom paint
• Cold Fusion White finish
• In-deck fish boxes and storage
• Port-side dive door
• Anchor chute through stem with stainless steel plow anchor & windlass
• 250’ all-chain anchor rode (electric)
• Polished aluminum recessed bow handrail
• Side storage lockers (port & starboard)
• Fiberglass under-gunwale forward side lockers
• Pop-up cleats in lieu of standard fixed cleats & hawse pipes
• Underwater light package (4 lights)
• Deck box lighting throughout
• Faux toe rail
• Faux teak helm pod
• Teak decking on raised helm platform, mezzanine step & forward step
• Removable stainless steel dive ladder (forward side locker)
• Transom-mounted retractable swim ladder

• Quad Mercury Verado V12 600 HP outboards
• Mercury joystick control
• Bow thruster with proportional control
• Seakeeper SK9 gyro stabilization
• Zipwake trim tabs
• Automatic engine flush system (Reverso)

• 15kW diesel generator
• Odyssey Group 31 batteries (one per engine + three house batteries)
• Dual 60-amp battery chargers with 50’ shore cord
• Battery voltage & amperage monitoring system
• Battery distribution panel with activated switches & voltage-sensing parallel
• Color-coded, labeled, and numbered wiring system
• BocaTech 12V switching with backlit labels
• Bulkhead-mounted horn
• High-water alarm system
• Multiple bilge pumps (aft & mid-ship) with auto/manual control
• Auto sump box inside console mechanical space
• Whale Gulper pumps (mid-ship & fish boxes)
• Fuel manifold system (draw from any tank)

• DC pressurized freshwater system with console fill
• Headhunter X-Caliber freshwater pump + backup pump
• Electric freshwater head with Y-valve overboard discharge
• Deck pump-out fitting for holding tank
• PEX freshwater plumbing
• Freshwater washdowns (multiple locations)
• Saltwater washdown system
• Water heater (quick-recovery electric)
• S&I watermaker
• S&I ice chipper (540 lbs/day)

• Dual transom livewells with clear lids
• Forward fish box & port/starboard deck boxes plumbed to Gulper pumps
• Refrigerated port aft fish box
• Hooker SeaChest 4500 livewell system with helm control
• Additional Hooker 4500 variable-speed livewell pump
• Under-gunwale mounted rod holders
• Gemlux boltless rod holders
• Additional Gemlux rod holders in coaming (30° & 15°)
• 12V electric reel outlets (2)
• Refrigerated fish boxes
• Locking port & starboard deck hatches (keyed alike)
• Prep for future sonar installation (tube installed, no hull cut)

• Black acrylic helm panel for flush-mounted electronics
• ProCurve solid curved glass enclosure
• Costa Marine wing panels / full enclosure
• Flush-mounted, lighted compass
• Edson carbon-fiber steering wheel
• Faux teak helm pod
• Helm and seating air conditioning
• Prep for Palm Beach Towers (PBT) tower

• Custom Palm Beach Towers tuna tower with molded top for 55’ open center console
• Single perimeter polished pipe rail with 5’ gap and dual antenna standoffs
• Molded fiberglass hardtop with Valhalla-style recessed electronics box (underside)
• Express-style molded radar pod
• Molded fiberglass sunshade with welded antenna mounts
• One-piece molded standing platform with integrated molded storage box
• Molded recessed teaser reel opening with push-style access door
• Pipe handrails welded on inboard angle along hardtop perimeter rail
• Gelcoat underside of hardtop in Valhalla Grey to match hull gloss finish
• Painted underside of tower sunshade in Valhalla Grey gloss
• Satin black–painted sunshade frame and control box top

• 53” molded tower control box with flush-mounted compass and cover
• Mercury Quad (4) 600 HP electronic tower controls & steering system
• Start/stop controls, displays, and Mercury joystick integration
• Side-Power bow thruster joystick control mounted in tower control box
• Zipwake trim tab control mounted and wired at tower station
• Windlass control switch installed in tower control box

• Lumitec Spectrum recessed hardtop lights
• Molded 2-in-1 spreader light pod with aft 12V LED under platform
• Molded forward underside hardtop LED light pod
• Molded low-profile spreader light pods (port & starboard) with Lumitec Corsica 24V LEDs
• Spectrum color lights recessed under platform and tower sunshade
• Tri-color LED lighting under platform and sunshade
• Molded LED navigation lights (port, starboard, stern)
• Rigid 30” spot-style LED light bar molded into platform edge, wired to helm
• OGM LED masthead/anchor light mounted on sunshade pole
• Molded round wedge mount forward on hardtop for FLIR camera

• Folding jump seats with cushions on each outboard side of belly ring
• Polished rod holders welded to aft tower legs
• Polished rod holders welded to rail behind hardtop
• Rod holders with integrated steps welded to aft main tower legs
• Molded overhead stereo speaker recesses
• Molded 4-in-1 stereo speaker pod (underside aft hardtop)

• Rupp 33’ Tournament Series HD outriggers with dual spreaders and solid back bar
• Rupp center rigger with welded mount
• Welded rigger locks
• Outriggers mounted on hardtop with pulleys installed
• (2) Miya Epoch Super US9R 12V electric teaser reels with remotes
• Teaser reels wired to breakers and tower control box
• Recessed teaser reel opening fully integrated into hardtop

• Release Marine first-row seating (4) with electric slides, flip-up bolsters, armrests
• Second-row U-shaped mezzanine seating with table & drink box
• Integrated GG Schmitt folding transom seats
• Upgraded jump seat backrests for forward bench seating
• Costa Marine forward lounge seating with armrests
• Costa Marine forward sunshade with stainless steel poles
• Padded cockpit coaming bolsters
• Custom Costa “all-over” covers (light charcoal)

• Air-conditioned console cabin (single-zone DX A/C)
• Dinette seating converting to queen-size berth
• Walnut interior veneer (horizontal grain)
• Grey interior décor scheme
• Synthetic teak flooring
• Quartz galley countertop with stainless steel sink
• Refrigerator/freezer
• Microwave in upper galley cabinet
• 32” flat-screen TV
• Overhead LED lighting with dimmer
• Overhead Bomar escape hatch
• Port & starboard non-opening portlights
• Quartz vanity top in head with stainless steel sink
• Interior access door to mechanical room
• Multiple USB & 12V outlets

• 220V / 50Hz electrical system
• Built to Australian specifications
• Fuel delivery included

• Quad Mercury Verado V12 600 HP with joystick control
• Seakeeper SK9 Gyro Stabilization for unmatched offshore comfort
• Bow Thruster (Proportional Control) + Zipwake trim tabs
• 15kW Diesel Generator with full 220V / 50Hz international spec
• ProCurve Curved Glass Helm Enclosure with Costa Marine wing panels
• Release Marine Helm Seating (4) w/ electric slides & flip-up bolsters
• Dual Transom Livewells + Hooker SeaChest System (helm-controlled)
• Refrigerated Fish Boxes including port aft box
• Extensive Freshwater Capability: watermaker, ice chipper (540 lbs/day), multiple washdowns
• Luxury Air-Conditioned Console Cabin with queen berth conversion, galley, head & 32” TV
• Teak & Faux Teak Package (helm pod, toe rail, raised helm, mezz & forward steps)
• Underwater Lighting Package (4 lights) + full deck box lighting
• Premium Upholstery Package with Bentley stitching & custom Costa covers
• All-Chain Anchor Rode (250’) with windlass & anchor chute
• Dive-Ready Setup: port dive door, removable dive ladder, side lockers
• Palm Beach Towers (PBT) custom tuna tower with integrated controls
• Built to Australian Specification

• Garmin GPSMAP 9222 22” Touchscreen Multifunction Displays (qty 2)
• Garmin GPSMAP 8612 TS Multifunction Display (tower)
• Garmin GMR 1234 xHD3 12kW Open Array Radar with 4’ array
• Garmin BlueNet 30 High-Speed Network Gateway
• Garmin USB Card Reader
• ADAM Ethernet Switch

• Garmin GSD 28 High-Performance Sounder Module
• Airmar R109LHW High-Wide CHIRP Transducer
• Garmin GMI 20 Digital Depth & Instrument Display
• Custom 38” Through-Hull Sonar Tube
• AME Custom 900mm Sonar Tube Cover Kit

• ICOM M510 EVO VHF Marine Radios (qty 2)
• ICOM HM-195 CommandMic IV (helm & tower)
• Flush-mount kits and extension cabling
• Comrod AV90/2B 16’ VHF Antennas (qty 2)
• Tower & hardtop antenna mount packages
• NMEA 0183 to NMEA 2000 Interfaces

• Garmin GC200 Marine IP Camera (engine/mechanical room)
• FLIR MD-625 Fixed Thermal Imaging Camera
• FLIR Hardtop Mount
• Garmin Network PoE Isolation Coupler

Head Unit & Control:

• Fusion Apollo RA770 Touchscreen Stereo w/ Apple AirPlay
• Fusion ERX400 Wired Remotes (helm & cabin)
• SiriusXM Tuner with dedicated antennas

Amplification:

• JL Audio M800/8v2 8-Channel Amplifier
• JL Audio XDM600/6 Amplifier
• JL Audio XDM600/1 Subwoofer Amplifier

Speakers & Subwoofers:

• (8) JL Audio M6 8.8” Coaxial Speakers
• (6) JL Audio M6 7.7” Coaxial Speakers (hardtop)
• (2) JL Audio M6 6.5” Cabin Speakers
• (2) JL Audio M6 10” Subwoofers

• Tower-mounted Garmin MFD
• Windlass switch installed in tower control box

• Professionally installed by Atlantic Marine Electronics
• Fully networked Garmin ecosystem
• Integrated helm, tower, cabin, and mechanical monitoring
• Turnkey electronics package

• Triple Garmin Touchscreen MFDs – Dual 22” **Garmin GPSMAP 9222 at helm + tower MFD
• 12kW Garmin Open-Array Radar – GMR 1234 xHD3 for long-range offshore navigation
• Tournament-Grade Sonar Package – Garmin GSD 28 w/ Airmar R109LHW CHIRP transducer
• FLIR Thermal Night Vision – FLIR MD-625 fixed thermal camera
• Redundant VHF Communications – Dual ICOM M510 EVO radios w/ helm & tower CommandMics
• Garmin BlueNet High-Speed Network – Fully integrated radar, sonar, cameras & displays
• Engine Room Monitoring Camera – Garmin GC200 IP camera
• Premium JL Audio / Fusion Apollo Sound System – Multi-zone, subwoofers, amps, AirPlay
• Tower-Integrated Electronics & Controls – MFD, VHF CommandMic & windlass control
• Professionally Installed by AME – Atlantic Marine Electronics, turnkey & offshore-ready